Notes; Locked Programmes (Disinfecting Programmes); Locating The Drum Door To The "Clean Side; Hot Water Rinse - Miele WS 5243 Operating Instructions Manual

Notes

Locked programmes (Disinfecting pro-
grammes)
If a disinfection programme is interrupted
or if there is a fault during the disinfecting
phase (wash time 2), the whole pro-
gramme must be repeated to ensure that
disinfection is achieved.
Turn the key switch to position D "Unlock-
ing".
At this operating level barred programmes
can be unlocked.
Press the End 7 button.
Turn the key switch to position B "Oper-
ation".
The programme can now be repeated.

Locating the drum door to the "Clean side"

The DOOR LOCATING programme rotates
the drum opening to the "Clean side". Unfin-
ished laundry can be transported from the
"Clean side" to the "Unclean side".
The DOOR LOCATING programme can also
be used to transport laundry in the drum to
the "Clean side". It is the user's responsibility
to ensure that the laundry is hygienically
clean before it is removed from the machine.
M.-Nr. 05730940
Rinsing with hot water
Rinsing with hot water is a benefit for ma-
chines connected to a hot water supply.
Standard programmes
1 Cottons 95°C and
2 Cottons 60°C
are programmed to rinse with hot water.
If a hot water supply is available it is an ad-
vantage to run the final rinse with hot water.
This reduces the residual moisture content of
the laundry after spinning and the laundry re-
tains heat.
If the laundry is then tumble dried or ironed
straight after the wash programme savings
will be made in the time it takes to process it
and in the amount of energy required.

Connecting a printer

Printer - operation:
A report of a whole programme or a section of
a programme can be printed. See the pro-
gramming instructions supplied with the
machine.
To print a wash report the machine will have
to be reprogrammed by a Miele Service tech-
nician.
To operate a printer with a parallel interface
an interface adapter is needed between the
serial interface and the parallel interface.
22