Selecting An "Unlocked" Programme; To Change The Temperature And The Spin Speed - Miele WS 5243 Operating Instructions Manual

Selecting an "unlocked" programme

Turn the key switch to position B "Oper-
ation".
Press the Mains on Y switch.
Turn the programme selector switch to the
required programme.
The display will then show for example:
PROGRAMME 25
>95°C< Main wash
Rinses
With Pre-wash
To select the "With Pre-wash" programme
block press the Block + T button. The indi-
cator light above the button will light up.
When pressing the Block + T button the fol-
lowing will show in the display:
PROGRAMME 25
>60°C< Pre-wash
95°C Main wash
Rinses

To change the temperature and the spin speed

The following programme changes can be
made before a programme is started:
The temperature in 1 °C stages from cold,
15 to max. 95 °C.
The spin speed can be changed in 100 rpm
stages from 0 to 300 to a max. of 950 rpm on
the WS 5243 and to 800 rpm on the WS 5323.
PROGRAMME 25
>60°C< Pre-wash
95°C Main wash
Rinses
Use the Cursor 2 button to position the
cursor on the input field for the pre-wash
temperature and set the required tempera-
ture (60 °C in this example with the Plus
4 or Minus 3 buttons.
Use the Cursor 2 button to position the
cursor on the input field for the main wash
temperature and set the required tempera-
ture with the Plus 4 or Minus 3 buttons.
M.-Nr. 05730940
COTTONS
1
3 800 RPM
COTTONS
1
1
3 800 RPM
COTTONS
1
1
3 800 RPM
Position the cursor on the input field for
the spin speed and set the required spin
speed with the Plus 4 or Minus 3 but-
tons.
Press Start X in to start the programme.
Once the programme has started the pro-
gramme sequence will show in the display.
PROGRAMME 25
60°C Pre-wash
95°C Main wash
nd
The 2 display line shows the actual suds
temperature, in this instance of the Pre-wash,
with the time line extending to the right. The
following programme block, in this instance
the Main wash, is shown underneath it.
PROGRAMME 25
95°C Main wash
Rinse 1
When the Pre-wash programme block has fin-
ished, the Main wash programme block ap-
nd
pears in the 2 line of the display, with the
actual suds temperature , and the time line ex-
tending off to the right. The next programme
block, here Rinse 1, is shown underneath it.
If an arrow appears in the last line at the right
hand side ( à ), this indicates that there is an-
other display line to follow. Pressing the cur-
sor 2 button brings up further information
relating to the PROGRAMME in the lower
lines.
Programme end display
After water from the last heating phase has
drained away or after the last "Cool Down"
the programme end time is shown in hours
and minutes.
PROGRAMME 25
Rinse 1
Rinse 2
Programme end
18
COTTONS
20°C
COTTONS
20°C
COTTONS
11 : 25 hrs
à
à
à