Remote Control Unit Operation - Kenwood KR-A5050 Instruction Manual

Remote control unit operation
Loading batteries I Operation procedure
Remove the cover.
2 Insert batteries.
i Insert two AA-size (R6/SUM-3) batteries as indicated by the
polarity marking.
3 Close the cover.
Plug the power cord of the system into an AC
wall outlet, and press the POWER key on the
remote control unit to turn the power on.
When the power is turned on, press the key of
the source component to be operated.
* When two operation keys on the remote control unit are
pressed successively, wait for one second or more be¬
tween presses.
' Components connected via the system control cords,
such as a CD player, can also be remote-controlled. In
this case, please read the instruction manual supplied with
your CD player.
Remote control sensor
Notes on operation
• The supplied batteries are intended only for use in checking operation. Therefore, battery life may be shorter than ordinary batteries.
• When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
• Malfunction may occur if direct sunlight or the light of a high-frequency fluorescent lamp shines on the remote control sensor. In such a case,
change the system installation position to prevent malfunction.
KR-A5Q50 lEn) 11