Air Intake Control Switch (With A.q.s); Heating And Cooling System Off - Hyundai Elantra Owner's Manual

B980C02E-GAT

Air Intake Control Switch (With A.Q.S)

(If Installed)
This is used to select fresh outside air or
recirculate inside air automatically.
: OFF
: ON
Fresh mode :
Air enters the vehicle from the outside and is
heated or cooled according to the function
selected.
Recirculation mode :
Air from within the passenger compartment will
be drawn through the heating system and heated
or cooled according to the function selected.
FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI FEATURES OF YOUR HYUNDAI
Exhaust gas cutoff mode :
Air enters the vehicle from the outside.
But if exhaust gas enters the vehicle from the
outside, the exhaust gas cutoff mode (
automatically converted to the (
prevent exhaust gas from entering the vehicle.
NOTE:
o It should be noted that prolonged opera-
tion of the heating system in recircula-
tion mode (
of the winds-hield and side windows and
the air within the passenger compart-
ment will become stale. In addition, pro-
HXD118H
longed use of the air conditioning with
the recirculation mode (
may result in the air within the passenger
compartment becoming excessively dry.
o When the ignition switch is turned "ON",
the air intake control will change to (
mode (regardless of switch position). This
is normal operation. The air intake control
operates in "AUTO" mode when turning
the ignition to the "ON" position if the
"AUTO" mode was used before shutting
off the engine.
) is
) mode, to
) will give rise to misting
) selected
)
CAUTION:
If the windows fog up with the Recirculation
or A.Q.S mode selected, set the air intake
control to the Fresh air position or A.Q.S
control to "OFF".
B980D01Y-AAT

Heating and Cooling System Off

Press the "OFF" button to stop the operation of
the heating and cooling system.
B980E01E-AAT
Air Flow Control
This is used to direct the flow of air. Air can be
directed to the floor, dashboard outlets, or
windshield. Four symbols are used to repre-
sent Face, Bi-Level, Floor and Floor-Defrost air
position.
B980E01E
1- 63