Adjusting The Bottle Rack; Perfectfresh Zone Compartments - Miele k 37472 id Operating And Installation Instructions

The raised edge at the back must face
upwards to prevent food from touching
the back of the appliance and freezing
to it.
Stoppers prevent the shelves from
being dislodged by mistake.

Adjusting the bottle rack

The bottle rack can be placed at
different positions in the appliance.
^ Raise the bottle rack slightly at the
front, and pull it forwards a little until
the notch at the side is in line with the
shelf support. It can then be raised or
lowered to the required level.
The rear rail must face upwards to
prevent bottles from touching the back
of the appliance.
Stoppers prevent the bottle rack from
being dislodged by mistake.
Adjusting the interior fittings
PerfectFresh zone
compartments
The compartments in the PerfectFresh
zone are on telescopic runners, and
can be removed for filling, emptying or
cleaning purposes.
Remove the bottle shelf from the door
to make it easier to take out the
compartments.
^ Pull the compartments out as far as
they will go.
^ Holding the sides of the compartment
at the back, lift it up and then
forwards and out.
Push the runners back in again to
avoid damaging them.
^ Carefully pull out the lid between the
compartments slightly, and lift it
down and out.
39