Display Brightness S - Miele k 37472 id Operating And Installation Instructions

Selecting further settings
^ By touching the X or Y sensor, you
can now select:
0: sensor tone off; door alarm off
1: sensor tone off; door alarm on
2: sensor tone off; door alarm on
3: sensor tone on; door alarm on
^ Touch the OK sensor to confirm your
selection.
The selected setting is applied, the )
symbol flashes.
^ Touch the settings sensor to leave
settings mode.
Otherwise the appliance exits
settings mode automatically after
approximately one minute.
30
(after 4 minutes)
(after 2 minutes)
(after 2 minutes)

Display brightness s

The display brightness can be adjusted
to suit the lighting conditions of the
room.
The display brightness can be altered
in stages from 1 to 3. The default setting
is the maximum brightness, option 3.
Altering the display brightness
^ Touch the settings sensor.
All symbols available for selection
appear in the display and the 0 symbol
flashes.
^ Touch the sensors for setting the
temperature (X or Y), repeatedly until
the s symbol flashes.
^ Touch the OK sensor to confirm your
selection.
The last selected setting flashes and
the s symbol lights up in the display.