Adjusting The Interior Fittings; Adjusting The Door Shelf/Bottle Shelf; Moving The Bottle Holder; Adjustable Shelves / Adjustable Shelves With Led Lighting - Miele k 37472 id Operating And Installation Instructions

Adjusting the interior fittings

Adjusting the door shelf/bottle
shelf
^ Push the door/bottle shelf upwards,
then remove it by pulling it forwards.
^ Replace the door/bottle shelf at the
required position. Ensure that it is
pushed back into position securely.

Moving the bottle holder

The bottle holder can be moved to the
left or right to create more room for
drinks cartons, for example.
The bottle holder can be removed
completely (e.g. for cleaning).
^ Push the bottle shelf upwards, then
remove it by pulling it forwards.
^ Pull the bottle holder upwards to
remove it from the rear edge of the
bottle shelf.
38
Adjustable shelves /
Adjustable shelves with LED
lighting
The LED lighting is located in the
stainless steel trim of the adjustables
shelves.
You can illuminate the refrigerator
section as you wish by moving the
shelves.
If the lighting is not working, check
that the shelves are positioned in the
side supports correctly:
The shelves have metal discs
(contacts) in the left-hand front
corner which supply power to the
LED lighting. Make sure when
inserting the shelves that the
contacts click into the shelf supports
correctly.
Moving the adjustable shelves /
adjustable shelves with LED lighting
The shelves can be adjusted according
to the height of the food.
^ Raise the shelf slightly at the front,
and pull it forwards a little until the
notch at the side is in line with the
shelf support. It can then be raised or
lowered to the required level.