Daylight Saving Time Setup; Restart The Unit - NUUO NVRmini 2 User Manual

When you modify the date or time of the system, the system may find the wrong data
when searching the recorded data. Backup the recorded data before changing the
time.

2.7.8 Daylight Saving Time Setup

1. Open Internet Explorer and log in to the unit.
2. Click System / Date/Time.
3. Click the Time Zone tab.
4. Check the Adjust clock for daylight saving changes option and select
the time change of daylight saving time in your location.
5. Click the OK button.

2.7.9 Restart the Unit

1. Open Internet Explorer and log in to the unit.
2. Click System / Reboot/Shutdown.
3. Check the Reboot option.
4. Click the OK button.
5. A confirmation dialog pops up. Click the OK button to reboot the unit.
The restart procedure runs automatically. When the unit is fully online:
The System Status LED turns blue.

The buzzer beeps one time

(if the buzzer is enabled).
64