Set Up Joystick Control - NUUO NVRmini 2 User Manual

status on monitor display.
6. Check Show camera event to display the words of detected camera event
on the correspondent screen.
7. Check Popup system event to pop up system event message dialog as a
warning when a system event occurred.
8. Check Popup E-map on event to pop up E-map with event indicator when
camera or I/O Box event occurred.
9. Click the OK button.
"Popup E-map on event" only activates on event, which means that you should not
only edit camera and I/O on E-map but setup camera motion, camera input and I/O
Box input as an event. Refer to

5.1.8 Set up Joystick Control

1. Open Internet Explorer and log in to the unit.
2. Click the Live View button on the top of the page.
3. Click the General Setting button.
4. Click the Joystick tab.
Function: You can choose the function from the drop-down menu for the

button of the joystick.
Event & Action Management
100
to do the settings.