Table of Contents
Advertisement
Chapter 1 General Description
4.2
Rear view
Air Cooling model, liquid Cooling model
(1) AC Inlet
This socket is used to connect the power cord.
(2) PCI slots
(3) Chassis Lock Tab
The lock is provided to protect internal components from
theft.
(4) Serial port (COM A) connector
This connector is used to connect devices that support a
serial interface. Note that it is not possible to directly
connect to a dedicated line. If the N8117-01A additional
RS232C connector kit (available as an option), is
connected, the connector at N8117-01A will be the serial
port B connector.
(5) Display connector
The connector to connect a display
(6) DUMP Switch
Press this switch to obtain a memory dump.
(7) BMC RESET Switch
The switch to reset BMC of this server. Use the switch only
when there is something wrong with EXPRESSSCOPE
Engine 3 (BMC).
36
(5) (4)
(7)
(6)
(8)
(10)
(13)
(11)
(9)
Important
If you press DUMP Switch, the server will stop.
Express5800/T110f-S User's Guide
(1)
(11)
(12)
(2)
(3)
(8) USB connectors
These connectors are used to connect devices that support
the USB interface.
Blue connector: for USB 3.0
Black connector: for USB 2.0
(9) LAN connectors
Supports 1000BASE-T interface.
If Shared BMC LAN feature is enabled in ROM Utility, LAN
connector 1 can also be used as the management LAN
connector. However, sharing port is not recommended from
the point of performance and security, because LAN
connector 1 may receive both data.
(10) Management LAN connector
A LAN connector which supports 100BASE-TX. This port is
used for connection with EXPRESSSCOPE Engine 3, and
cannot be used as a data transmission port. This port
cannot be used when Shared BMC LAN feature is used.
(11) LINK/ACT LED (green)
The LED indicates the access status of LAN
(12) SPEED LED (green/amber)
The LED indicates the transfer speed of LAN ports
(13) SPEED LED (green)
The LED indicates the transfer speed of the LAN port used
for management
4. Names and Functions of Parts
Advertisement
Table of Contents
