Table of Contents
Advertisement
Loading/Saving Piano Setups
The HPi-50e lets you load a piano setup that you've saved on a USB
flash drive, or save your piano setup to a USB flash drive.
MEMO
Only piano setups that were created on the HPi-50e can be
loaded.
Loading a Piano Setup
1.
Connect your USB flash drive to the piano's USB memory
port .
2.
Hold down the [Key Touch] button and press the
[Transpose] button .
The [Key Touch] button and [Transpose] button will light; the
HPi-50e will be in Function mode.
3.
Use the cursor [
] [
] buttons to select "Piano Setup
Import . "
4.
Press the [
] button .
The Piano Setup Import screen will appear.
If you decide to cancel without loading the piano setup, press the
[X] button.
5.
Use the cursor [
] [
] buttons to select the piano setup
that you want to load .
6.
Press the [O] button .
The piano setup will be loaded from the USB flash drive.
7.
Press the [Key Touch] button or the [Transpose] button to
exit Function mode .
Saving a Piano Setup
1.
Connect your USB flash drive to the piano's USB memory
port .
2.
Hold down the [Key Touch] button and press the
[Transpose] button .
The [Key Touch] button and [Transpose] button will light; the
HPi-50e will be in Function mode.
3.
Use the cursor [
] [
] buttons to select "Piano Setup
Export . "
4.
Press the [
] button .
The Piano Setup Export screen will appear.
If you decide to cancel without saving the piano setup, press the [X]
button.
5.
Use the cursor [
] [
] buttons to specify the save-
destination number .
No piano setup has been saved in numbers whose piano setup
name is shown as (Empty).
If you want to save by overwriting an unwanted piano setup,
choose the unwanted piano setup number.
You can use the [ ] [ ] buttons to select the name, and then press
the [
] button to edit the name of the piano setup.
Use the [
] [
] buttons to select the position at which to
change the character.
Use the [ ] [ ] buttons to change the character.
6.
Press the [O] button to confirm the name .
7.
Press the [O] button to save the piano setup to your USB
flash drive .
When the piano setup has been saved, you will return to the screen
of step 3.
NOTE
Never turn off the power or disconnect the USB flash drive while
the screen indicates "Executing... "
8.
Press the [Key Touch] button or the [Transpose] button to
exit Function mode .
Items saved in the piano setup
Piano Designer settings
Other
Items automatically
remembered by the HPi-50e
Convenient Functions
Lid
Damper Resonance
Hammer Noise
Hammer Response
Duplex Scale
Dynamic Harmonic
String Resonance
Key Off Resonance
Cabinet Resonance
Soundboard Behavior
Damper Noise
Master Tuning
Temperament
Temperament Key
Stretch Tuning
Note Volume
Note Character
Ambience (On/Off, value)
Brilliance (value)
Key Touch (On/Off, value)
Headphones 3D Ambience
Volume Limit
Volume (Speaker, headphones)
53
Advertisement
Table of Contents
