Saving Or Loading Sound Settings (Registration); Saving The Sound Settings (Registration) Of A Memory Bank To Usb Memory - Roland C-330 Owner's Manual

Saving or loading sound settings (registration)

All sound settings (registration) saved in all memory banks (M01–M20) can be saved together to USB memory. On the C-330, memory
banks M01–M20 can be saved and loaded as a single unit.
The C-330 can store up to 999 combinations of sounds on USB memory.

Saving the sound settings (registration) of a memory bank to USB memory

Here's how to save all the sound settings of a memory bank to USB memory.
1.
Connect your USB memory to the USB memory connector.
2.
From the main screen, press the [Select/Menu] knob.
3.
Turn the [Select/Menu] knob to select "11 Save/Load (USB)."
fig.D-Save-1.eps
4.
Press the [Select/Menu] knob.
The "Save/Load (USB)" screen will appear.
fig.Tremulant2.eps
5.
Turn the [Select/Menu] knob to select "Save General Piston."
6.
Press the [Select/Menu] knob.
The "Save General Piston" screen will appear.
fig.D-Save-1.eps
7.
Assign a name to the combination of sounds you want to save.
At the "Name" field, press the [Select/Menu] knob.
For details on how to assign a name, refer to "If you want to rename the data you're saving" (p. 38).
8.
Turn the [Select/Menu] knob to select the "No." field, and turn the [Value/Exit Menu] knob to select the area
(save-destination number) in which you want to save the settings.
9.
Press the [SET] piston to save the data.
If you decide to cancel, press the [Value/Exit Menu] knob.
Never disconnect the USB memory or turn off the power while sound settings are being saved to USB memory. Otherwise, the
sound settings will not be saved to USB memory, and malfunction may occur.
Saving or L oading Songs or Settings
45