Loading/Saving Piano Setups; Saving Piano Settings (Piano Setup Export); Loading Piano Settings (Piano Setup Import) - Roland GP609 Owner's Manual

Advanced Operation
˙

Loading/Saving Piano Setups

The piano settings that you make can be used on another GP609 unit
if you save your settings on a USB flash drive and then load them into
the other GP609.
* Only piano settings that were created on an GP609 can be loaded.
Settings that are saved as piano settings
Setting
Speaker volume
Headphone volume
Ambience
Headphones 3D Ambience
Brilliance
Key Touch
Hammer Response
Piano Designer settings
Master Tuning
Temperament
Temperament Key
Volume Limit

Saving Piano Settings (Piano Setup Export)

1.
Connect your USB flash drive to the USB Memory port
(p. 7).
2.
Press the [Ambience] button and [Brilliance] button
simultaneously.
3.
Use the [K] [J] buttons to select "Piano Setup Export," and
then press the [s] (Enter) button.
The Piano Setup Export screen appears.
4.
Rename the piano settings.
Select the position at which you want to change
[K] [J] buttons
the character.
[–] [+] buttons Change the character.
5.
Press the [s] (Enter) button.
The settings are saved.
NOTE
Never turn off the power or disconnect the USB flash drive while
the screen indicates "Executing... "
6.
Simultaneously press the [Ambience] button and
[Brilliance] button to exit Function mode.
18

Loading Piano Settings (Piano Setup Import)

1.
Connect your USB flash drive to the USB Memory port
(p. 7).
2.
Press the [Ambience] button and [Brilliance] button
simultaneously.
3.
Use the [K] [J] buttons to select "Piano Setup Import," and
Page
then press the [s] (Enter) button.
p. 8
The Piano Setup Import screen appears.
p. 8
p. 8
p. 8
p. 8
p. 8
p. 8
4.
Use the [–] [+] buttons to select the piano settings that you
p. 15
want to load.
p. 24
p. 24
5.
p. 24 Press the [s] (Enter) button.
p. 26
A confirmation message appears.
If you decide to cancel, press the [u] (Exit) button.
6.
Use the cursor [J] (right) button to select "Yes," and then
press the [s] (Enter) button.
The settings are loaded.
NOTE
Never turn off the power or disconnect the USB flash drive while
the screen indicates "Executing... "
7.
Simultaneously press the [Ambience] button and
[Brilliance] button to exit Function mode.