Making A New Smf Recording - Roland HPi-50e Owner's Manual

Making a New SMF Recording

1.
As described in "Getting Ready to Record" (p . 36), turn mix recording on/off and select the recording mode .
In this example, turn mix recording "off" and choose "SMF" as the recording mode.
2.
Press the [ ] (Rec) button .
The [ ] (Rec) button will light, the [
will enter the recording-standby state in new recording mode.
Explanation
New Song A new song will be recorded.
Record an parts while listening to the recorded song (SMF only).
Add On
For details refer to "Overdubbing a Recorded Song" (p. 39).
If you decide to cancel recording, press the record button once again.
3.
As necessary, use the part buttons to select the part(s) that you want to record .
Your performance will be recorded on the part(s) whose button is blinking.
You can choose the following parts.
• [Right] part and [Left] part (the performances of both hands)
• [Right] part
• [Left] part
• [Accomp] part
When using Split or Twin Piano, your performance will be divided at the split point and assigned to the [Right] and [Left] parts for recording.
4.
As necessary, use the [Slow] [Fast] buttons to set the tempo .
5.
Press the [ ] (Play/Stop) button .
After a two-measure count is heard (the measure number is shown as "-2" and "-1"), recording will start.
When recording starts, the [
MEMO
You can also start recording by playing the keyboard while in the recording-standby state. In this case, recording starts immediately and no count
will be sounded.
6.
Press the [ ] (Play/Stop) button .
Recording will stop, and a screen allowing you to save the song will appear.
Refer to "Saving a Song" (p. 38).
Twin Piano (p. 26)/Split Play (p. 22)
Part button
[Right] button
[Left] button
4
] (Play/Stop) button will blink, and the HPi-50e
] (Rec) button and [ ] (Play/Stop) button will light.
Performance that will be recorded
Twin Piano
Right side
Left side
5 6
Split Play
Right-hand tone
Left-hand tone
Recording
2 3
37