HOW TO INITIALIZE THE HDD & BLU-RAY DISC RECORDER
To put the program back to the factory-default,
initialize the unit by following the procedure below.
1. Turn the power on.
2. Put the unit into HDD/DISC mode. Remove the
disc on the tray and close the tray.
3. Press [i] (skip up), [1], [2], [3] buttons on the
remote control in this order. The following screen
will be displayed.
Version Info
F/W Name
: *******
Version
: *.**.**
Region
: *-*
Pickup
: **
Default Setting
: --
Default Setting : STOP
LCD/LED Check : OK
* All indicators on LCD light.
4. Press [STOP] button.
5. After the unit is initialized, the power will turn off
automatically.
Note: The titles recorded on HDD will not be deleted.
" * " differ depending on the models.
End : POWER
1-7-1
E4V20INT