Firmware Renewal Mode - FUNAI BH2-M200 Service Manual

How to Prepare a Software Update
Disc (BE F/W, FE F/W)
1. Copy the "****.bin" file to a CD-R/RW or DVD-R/
RW disc.
Note:
• Make sure to use a blank CD-R/RW or DVD-R/
RW disc.
• Copy one file per disc.
How to Update the Unit
(BE F/W, FE F/W)
1. Make sure the unit is not recording or dubbing in
HDD mode, or within 15 minutes a timer recording
begins.
2. Insert the software update disc and close the tray.
3. When the disc is recognized, the unit enters
Update mode. Fig. a appears on the screen and
Fig. b appears on the LCD.
" * " differ depending on the models.
Software Update
Current Version
Insert Version
Select 'Yes' and press [OK] button to start updating.
Press 'No' to exit software update.
Yes
Fig. a Update Confirmation Screen
Fig. b LCD in Update Mode

FIRMWARE RENEWAL MODE

: *.**.**
: *.**.**
No
4. Select "Yes" to start firmware loading. Fig. c
appears on the screen and Fig. d appears on the
LCD.
1. Loading
Loading Software...
If you want to exit update, press [RETURN].
Update will continue after screen turns black.
Please wait a moment.
Fig. c Firmware Loading Screen
Fig. d LCD during Firmware Loading
5. The unit will restart automatically then begins
updating. After the unit restarts and the display
becomes available, Fig. e appears on the screen.
The update progress is shown on the LCD.
1. Loading
Updating Software...
Please wait for a few minutes.
Do not unplug the AC code or interrupt updating process.
When update is completed unit will automatically turn off.
Update disc will eject after unit automatically turns back on.
Fig. e Firmware Updating Screen
Fig. f LCD during Firmware Update
6. Upon completion of firmware update, the unit
restarts and the tray will open automatically.
Remove the disc from the unit.
1-8-1
Software Update
2. Updating
Software Update
2. Updating
E4V20FW