FUNAI BH2-M200 Service Manual page 18

How to Confirm the Firmware
Version
1. Turn the power on.
2. Put the unit into HDD/DISC mode. Remove the
disc on the tray and close the tray.
3. Press [i] (skip up), [1], [2], [3] buttons on the
remote control in this order. The following screen
will be diplayed.
Version Info
F/W Name : *******
Version : *.**.**
Region : *-*
Pickup : **
Default Setting : --
Default Setting : STOP
LCD/LED Check : OK
* All indicators on LCD light.
4. To exit this mode, press [STANDBY/ON] button.
" * " differ depending on the models.
End : POWER
1-8-2 E4V20FW