Cabinet Disassembly Instructions - FUNAI BH2-M200 Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to items to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
[1] Top Cover
[2] Front
[3] Front CBA
Assembly
[4] HDD
[5] HDD Bracket
Assembly
[7] BD Mechanism
[6] HDD
Assembly
[11] Jack CBA
[12] D-Tuner
CBA
[13] BD/HDD
Main CBA Unit
[14] Power
Supply CBA
2. Disassembly Method
ID/
Fig.
Loc. Part
No.
No.
[1] Top Cover D1 5(S-1)
Front
[2] D2
Assembly
[3] Front CBA D2 ---------------
HDD
[4] D3
Assembly
HDD
[5] D4
Bracket
[6] HDD D4 ---------------
BD
[7] Mechanism D5
Assembly
[8] Rear Panel D6
Motor DC
[9] D6 Fan Folder
Fan
[10] Scart CBA D7 CN3501
[11] Jack CBA D7
D-Tuner
[12] D8 CN5900
CBA
[8] Rear Panel
[9] Motor DC Fan
[10] Scart CBA
Removal
4(L-1), 3(L-2), 4(S-2),
CN2105
4(S-3), Connector,
SATA Cable
4(S-4), HDD Damper,
HDD Earth Plate
4(S-5), CN502,
CN6101
4(S-6), 2(S-7), (S-8),
(S-9), 2(S-10),
CN8002
3(S-11), CN3002,
CN7400
ID/
Loc. Part
No.
BD/HDD
[13] Main CBA
Unit
Power
[14] Supply
CBA
↓ ↓
(1) (2)
Note:
(1) Identification (location) No. of parts in the figures
(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
e.g. 2(S-2) = two Screws of (S-2),
2(L-2) = two Locking Tabs of (L-2)
(5) Refer to "Reference Notes."
Reference Notes
1. CAUTION 1: Locking Tabs (L-1) and (L-2) are
fragile. Be careful not to break them.
2. When replacing the HDD, HDD format is
Note needed after replacing the HDD. Refer to "HOW
TO FORMAT THE HDD AFTER
REPLACEMENT."
---
3. When reassembling, be sure to use the original
1
screws or specified screws listed in the parts
list.
---
4. When replacing the BD/HDD Main CBA Unit,
the board and HDD will need to be recognized.
---
Refer to "BD/HDD MAIN CBA UNIT
REPLACEMENT."
---
2
---
3
---
---
---
---
1-6-1
Fig.
Removal
No.
3(S-12), CN2804,
D8 CN7401, CN7402,
CN7100
D9 3(S-13), Power Holder
↓ ↓
(3) (4)
Note
4
---
↓
(5)
E4V21DC