Rack Mounting Instructions; Separating The Sections Of The Rack Rails - Supero SuperServer 6026TT-HDTRF User Manual

2-5

Rack Mounting Instructions

This section provides information on installing the SC827 chassis into a rack unit
with the quick-release rails provided. There are a variety of rack units on the market,
which may mean the assembly procedure will differ slightly. You should also refer to
the installation instructions that came with the rack unit you are using.
Note: This rail will fi t a rack between 26" and 33.5" deep.

Separating the Sections of the Rack Rails

The chassis package includes two rail assemblies in the rack mounting kit. Each
assembly consists of two sections: an inner fi xed chassis rail that secures directly
to the server chassis and an outer fi xed rack rail that secures directly to the rack
itself.
Figure 2-2. Separating the Rack Rails
Rail Assembly
1 1
Extending the Rails
1 2
1 3
4
1
Warning: do not pick up the server with the front handles. They are de-
signed to pull the system from a rack only.
Separating the Inner and Outer Rails
1. Locate the rail assembly in the chassis
2. Extend the rail assembly by pulling it
3. Press the quick-release tab.
Quick-Release
4. Separate the inner rail extension from
Tab
Separating the Inner
Rail Extension
2-5
Chapter 2: Server Installation
packaging.
outward.
the outer rail assembly.