Appendix C System Specifi Cations - Supero SuperServer 6026TT-HDTRF User Manual

Appendix C: System Specifi cations
Appendix C
System Specifi cations
Note: unless noted specifi cations apply to a complete system (two serverboards).
Processors
Four Intel® 5600/5500 Series processors in LGA1366 sockets
Note: Please refer to our website for details on supported processors.
Chipset
Intel 5520/ICH10R
BIOS
32 Mb AMI SPI Flash ROM (each serverboard)
Memory Capacity (each Serverboard)
Twelve 240-pin DIMM sockets that can support up to 192 GB of registered ECC
DDR3-1333/1066/800 SDRAM, or 48 GB of unbuffered non-ECC 1333/1066/800
SDRAM per node
SATA Controller
Intel ICH10R on-chip controller to support six 3 Gb/s Serial ATA (RAID 0, 1)
SAS Controller
Daughter card with LSI 2108 SAS 2.0 controller for 6-port SAS per node
(6026TT-D6 series only, one per node)
Hard Drive Bays
Twelve hot-swap drive bays to house standard hard drives (six per node)
PCI Expansion
Four standard size PCI Express x8 cards (in x16 slots, two per node) with pre-
installed riser cards
C-1