Table of Contents
Advertisement
17 – Changing camera settings
17.5
Changing other camera settings
General
Camera settings affect images and how the camera operates.
Applicability
The procedure below is applicable to these settings:
■
■
■
■
■
■
■
■
■
Procedure
Follow this procedure to change the camera settings above:
NOTE
If the USB mode is set to Standard, the camera power goes off if Auto power off is
enabled and the camera is left connected to a PC and not used.
56
Digital camera lamp (to enable or disable the lamp used for the digital camera,
and in the Picture-in-Picture mode)
Regional (to change the language, units and time format)
Time/date (to set the time and date)
Auto power off (to set the time period after which the camera power automatically
switches off)
Display intensity (to set the intensity of the display)
Temperature range (to change the object temperature range that the camera
uses)
USB cable (to set the USB mode)
Firmware (to upgrade the camera firmware with a new version that is on a Mi-
croSD™ Memory Card.
Restore default (to restore the factory default values)
1
To display the main menu, push Menu.
2
To select Settings, push the navigation pad up/down.
3
To enable the Settings menu, push Select.
4
To select the setting you want to change, push the navigation pad up/down.
5
Use the navigation pad and the context-sensitive buttons to change the
setting.
Publ. No. T559059 Rev. a460 – ENGLISH (EN) – July 1, 2010
Advertisement
Table of Contents
