4
Disassembly/Assembly > Controller System > Removing the Main Motor > Procedure
CAUTION:
When installing the Drive Cover [2], be sure to align the 7 shafts with the shaft holes [1]
to fit the cover in place.
[1]
4
Disassembly/Assembly > Controller System > Removing the Main Motor > Procedure
[1]
[2]
F-4-70
Removing the Main Motor
■ Preparation
1) Remove the Left Cover.(Refer to page 4-13)
2) Remove the Reader Unit.(Refer to page 4-20)
3) Remove the Right Cover.(Refer to page 4-14)
4) Remove the Front Cover Unit.(Refer to page 4-15)
5) Remove the Upper Cover.(Refer to page 4-15)
■ Procedure
1) Remove the Scanner Cover [1].
• 2 Screws (black TP) [2]
x2
4-31
[2]
[1]
F-4-71
4-31