Canon M3010 Series Service Manual page 87

4
Disassembly/Assembly > Controller System > Removing the Paper Leading Edge Sensor > Procedure
5) Free the harness [1] from the Harness Guide [A], and remove the Paper Leading Edge
Sensor [2].
• 2 Claws [3]
x2
[3] [2]
NOTE:
The picture below shows how to route the harness.
4 Disassembly/Assembly > Controller System > Removing the Paper Leading Edge Sensor > Procedure
[A]
[3] [1]
F-4-93
F-4-94
CAUTION:
When installing the terminal [1], be sure that the Contact Spring [2] is in contact with it.
4-39
[1]
[2]
F-4-95
4-39