Removing The Cis Unit; Preparation; Procedure - Canon M3010 Series Service Manual

4
Disassembly/Assembly > Original Exposure System > Removing the CIS Unit > Procedure

Removing the CIS Unit

■ Preparation

1) Remove the Control Panel Unit.(Refer to page 4-29)
2) Remove the Copyboard Glass Unit.(Refer to page 4-21)

■ Procedure

CAUTION:
• Be sure not to lose the 2 spacers [1] of the CIS Unit when disassembling/assembling.
• Be sure not to touch the document reading part [A] of the CIS Unit when
disassembling/assembling.
[1]
4 Disassembly/Assembly > Original Exposure System > Removing the CIS Unit > Procedure
[A]
F-4-54
1) Move the CIS Unit [1].
[1]
2) Move the Flat Cable [1] to the left side.
• 2 Guides [2]
3) Remove the 2 spacers [3] and the Flat Cable [1].
[1]
[2]
4-26
F-4-55
[3]
[1]
F-4-56
4-26