Packet Data; Enabling Pin Activated Features; Error Message Screen - Motorola CLEARTONE CM5000 Feature User Manual

Packet Data

The Packet Data (PD) Service allows you to transfer data in a
TETRA system using the Internet Protocol (IP). Check with
your Service Provider for the availability of this feature.
For transferring data from a standard computer over the air
connect the computer via the Active Data Cable GMKN1022
with your CM5000. Your Service Provider has to setup
additional applications on your computer.

Enabling Pin Activated Features

To activate optional features (for example: GPS, Gateway,
Repeater, Multi-Slot Packet Data) use the PIN codes that
were supplied with the radio.
To enable features:
1. Turn off radio.
2. Turn on the radio by pressing and holdingOn Hook
button,Up Arrow button and
3. Select the feature from the list and enter feature PIN code
at the "Input Code" screen.PressOK.
You can repeat step 4 to select more then one feature. When
"Service Restricted" screen is displayed after selecting a
feature, please check programming parameters using the
Native Programmer.
4. Turn off radio by pressing

Error Message Screen

Radio will display error message screen when it detects an
error.
18
simultaneously.
.