Making Private Pre-Emption Interconnect Call - Motorola CLEARTONE CM5000 Feature User Manual

4. To end the call press On Hook key.
Called ID Number
Encryption Disabled
Called ID Number
Encryption Enabled

Making Private Pre-emption Interconnect Call

If a placed private call cannot be initiated as the receiving
terminal is busy you can change the call priority.
When the receiving terminal is busy the display shows Busy
Interrupt? prompt. Select Yes to change the call priority and
to initiate the call again.
When the re-initiated call is connected, the display shows the
traffic information.
34
Private In Use:
Call set-up procedure is completed
Terminal is in Traffic mode
Private In Use:
Call set-up procedure is completed
Terminal is in Traffic mode