Screen Saver; Terminal Disable/Enable; Terminal Permanent Disable - Motorola CLEARTONE CM5000 Feature User Manual

Screen Saver

If your Service Provider configured this feature, the screen
saver will automatically cover the CM5000 display after the
CM5000 stays idle for a pre-programmed period of time. If
you press a key or a call arrives, the screen saver is
deactivated and the CM5000 resumes standard operation.
The screen saver consists of a logo and an alphanumeric
text. Check in the menu options whether the Service Provider
has given you the capability of entering your own screen
saver text (see page 65).

Terminal Disable/Enable

Your CM5000 is provided with a feature that allows your
Service Provider to disable it temporarily in case it is stolen.
When your CM5000 is disabled, no calls can be initiated or
received. While your CM5000 is disabled, it will look and act
like it is turned Off. If you try to turn your CM5000 On, when it
is disabled, it will operate as described above. If your
CM5000 is found, your Service Provider can re-enable it.
After your CM5000 is re-enabled, you may resume normal
operation.

Terminal Permanent Disable

Your CM5000 is provided with a feature that allows your
Service Provider to disable it permanently in case it is stolen
or lost. When your CM5000 is disabled permanently, it
becomes inoperable.
After a Permanent Disable the CM5000 can not be re-
enabled by your Service Provider.
You are recommended to disable your CM5000 permanently
only when you do not expect the terminal to be recoverable
any more.
13