Tetra/Uhf Analogue Gateway Mode; General; Entering Tetra/Uhf Analogue Gateway Mode; Exiting Tetra/Uhf Analogue Gateway Operation - Motorola CLEARTONE CM5000 Feature User Manual

TETRA/UHF Analogue Gateway Mode

General

The CM5000 allows you to establish gateway connection
between the TETRA network and a UHF analogue system.
To notify TETRA users of an unencrypted user on the
network (while TETRA/UHF analogue gateway mode is
active), an audible warning tone is sent every time the
analogue unit transmits to the TETRA network.

Entering TETRA/UHF Analogue Gateway Mode

You can enter the analogue/digital gateway mode in DMO.
Before entering choose the required DMO group.
To enter the analogue/digital gateway mode:
1. From the Home display press
Menu button and then # key.
The display shows the current
UHF channel selected on UHF
mobile.
2. Select the required UHF
channel using up/down
navigation keys.
3. Select Gte to enter the analogue/digital gateway operation
Select Tet to return to DMO mode.

Exiting TETRA/UHF Analogue Gateway Operation

To exit the analogue/digital
gateway mode, from the VHF
Gateway display select Esc.
31