Entering Gateway Mode - Motorola CLEARTONE CM5000 Feature User Manual

In Repeater Mode Operation the CM5000 re-transmits
information received from one DMO terminal to other DMO
terminal enhancing coverage area.

Entering Gateway Mode

When the radio is in Gateway Mode, the radio will work only
as a gateway radio. It cannot work as a standard TMO/DMO
radio (the user cannot press PTT button, cannot hear the
communication voice, etc.).
When your CM5000 is in TMO
enter Gateway Mode in one of
the following ways:
• From the Home display press
Optns
Mode.
• Press the Menu button and
select More... > Networks > Gateway Mode.
The display shows Gateway
Monitor. In Gateway Monitor
Mode CM5000 checks if the
communication goes through
other gateway or not.
• When it does not pick up other
gateway communication, it
switches to Gateway Mode.
• When it detects other gateway
communication during
Gateway Monitor mode. The
display shows Gateway
Detected message. The radio
is in Temporary DMO.
It checks other gateway communication all the time. If
other gateway communication disappears, CM5000
returns to Gateway Monitor Mode.
Press Exit in Temporary DMO to switch to DMO.
16
Gateway
and select