Download Print this page

Miscellaneous Programming Codes; Prefix Settings - Siemens HE40T Quick Start Manual

Hide thumbs

Advertisement

Note: Turbo Dot Peen mode should not be used for reading small
marks (dot peen or others) as it may increase the processing time
and reduce the robustness of reading small marks.
FIGURE 1–34.
On

Miscellaneous Programming Codes

Prefix Settings

If you scan the following codes, you may lose your current settings.
Save settings on your reader before scanning the prefix codes. If
you scan more than one prefix, you will receive each scanned prefix
in your scanned data (i.e., if you scan comma prefix twice, you will
get two comma prefixes). Scan the codes in Figure 1–35 and
Figure 1–36 to set the appropriate prefix:
FIGURE 1–35.
Prefix - Comma
Prefix - Carriage Return
Line Feed (RS-232)
Rev 1.0.1, Dec. 2006
Turbo Dot Peen Mode Codes
Off
Prefix Settings
HE40T Quickstart Guide
Prefix - Space
Prefix - Tab
(RS-232)
Save Settings
21

Advertisement

loading

  Related Manuals for Siemens HE40T