Table of Contents
Advertisement
Further Support
If you have any questions concerning the use of products which are
not answered in this manual, please contact your local Siemens
partner at your Siemens office.
You can find your local partner at:
http://www.siemens.com/automation/partner
You can find a guide to the technical documentation on offer for the
individual SIMATIC products and systems at:
http://www.siemens.de/simatic-tech-doku-portal
You can find the catalog and online ordering systems at:
http://mall.automation.siemens.com/
Training Center
SITRAIN™ Siemens Training
Siemens Training (SITRAIN) offers a range of courses on Machine
Vision and Symbology Reading. Training classes are conducted in
Norcross, Georgia and at locations across the USA. SITRAIN also
offers courses on PLC, Drives, Controls, HMI, NET, Process
Control, Analyzers and Instrumentation, Electrical and Power,
Safety and more. Details of current SITRAIN course offerings can
be viewed at http://www.automation.usa.siemens.com/sitrain/
To view Machine Vision and Symbology course offerings, please
click on the "Automation" link in the middle of the page and then
the "Vision and Sensors" link from the list that is presented.
Alternatively, please contact the Siemens Training Registrar at
(800) 241-4453.
Technical Support
How to reach technical support for all A&D products
•
With the Support Request form on the Web:
http://www.siemens.de/automation/support-request
•
Telephone: + 49 180 5050 222
•
Telephone: 800 333-7421 (USA)
viii
HE40T Quickstart Guide
Rev 1.0.1, Dec. 2006
Advertisement
Table of Contents
