6.5
Codes with enabled factory setting
To enable or disable the codes, scan in the relevant codes (see section Code configurations
(Page 53)).
If a reader needs to be configured for reading codes that are not included in the list:
● Scan in the relevant codes in to enable them (see section Code configurations
(Page 53)).
SIMATIC MV320
The following codes are enabled in the factory settings:
● Codabar
● Code 39
● Code 93
● Code 128
● Data matrix
● Data Matrix Rectangle
● All GS1 DataBar
● Interleaved 2 of 5
● MSI Plessey
● PDF417
● QR code
● UPC/EAN/JAN
SIMATIC MV325
The following codes are enabled in the factory settings:
● Aztec
● Codabar
● Code 39
● Code 93
● Code 128
● Data matrix
● Data Matrix Rectangle
● All GS1 DataBar
● Interleaved 2 of 5
● PDF417
SIMATIC MV320 / SIMATIC MV325
Operating Instructions, 08/2015, C79000-G8976-C352-03
6.5 Codes with enabled factory setting
Operation
35