Page 2
Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
SIMATIC MV325 Product designation In the remainder of this document, the term "device" or "reader" or "handheld reader" is also used instead of the full product name "SIMATIC MV320" or "SIMATIC MV325". SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
Page 4
These operating instructions replace the operating instructions edition 03/2014. Current operating instructions on the Internet You will also find the latest version of these operating instructions on the Internet pages of Siemens Industry Online Support under the following entry ID: 78905254 (https://support.industry.siemens.com/cs/ww/en/view/78905254) Additional documentation A current list of the code configurations mentioned in this manual is available in the manuals: ●...
Page 5
Siemens recommends strongly that you regularly check for product updates. For the secure operation of Siemens products and solutions, it is necessary to take suitable preventive action (e.g. cell protection concept) and integrate each component into a holistic, state-of-the-art industrial security concept.
Turn the reader on ........................27 Establishing a Bluetooth connection (SIMATIC MV325) ............28 Operation .............................. 29 Working with the SIMATIC MV320 reader ................29 Aligning the SIMATIC MV325 reader ..................31 Setting the communication mode (SIMATIC MV325) ............. 32 Communication in batch mode (SIMATIC MV325) ..............
Page 8
"Specify character length to be read" function ............... 54 Service and Support ......................57 Certificates and approvals ..................... 59 A.4.1 FCC information ........................61 A.4.2 IC-FCB information ........................ 62 Index ..............................63 SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
The HMI devices described in these Operating Instructions can be recycled due to the low levels of pollutants. Contact a certified disposal service company for environmentally sound recycling and disposal of your old devices. When disposing of batteries, observe the locally applicable legal regulations. SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
Page 10
Changes or modifications to the device Changes or modifications not expressly approved by the person responsible for adherence to the relevant regulations could result in the loss of the user's operating approval for the device. SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
Description Product package SIMATIC MV320 The SIMATIC MV320 reader (article number 6GF3320-0HT01) is supplied with the following components: ● SIMATIC MV320 handheld reader The reader can be used on the USB or RS-232 interface. To use the RS-232 interface, you need to order the RS-232 cable and, if necessary, the appropriate power supply as accessories.
Are you on the move, working in different environments or do you need to read codes accurately on a large number of items? If so, the SIMATIC MV320 will be a valuable addition to your equipment.
● The housing, which is resistant to disinfectants and has IP65, prevents damage to plastic parts and protects the electronics and optics. ● Paging button supports the localization of the mobile reader. ● Reads barcodes on mobile devices. SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
Inserting the USB cable/power cable into the charging station ① 2. To prevent the station from slipping: Secure the rubber feet to the corners on the underside of the charging station. Figure 3-2 Charging station: Securing the rubber feet SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
For mounting the weighted base plate: 2. Lay the side of the base plate marked with "THIS SIDE DOWN" on the supporting surface. 3. Place the charging station on the base plate. SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
Page 17
Figure 3-4 Base plate: Threaded holes Figure 3-5 Charging station: Tightening the screws You have secured the charging station to the base plate. SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
Page 18
③ Figure 3-6 Base plate: Rubber feet markers ④ Figure 3-7 Base plate: Rubber feet secured The charging station is ready for use. SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
Note Mounting screws are not supplied with the product Since the mounting surfaces can differ, the mounting screws are not supplied with the product. Figure 3-9 Base plate: Mounting holes SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
Page 20
Base plate: Threaded holes Figure 3-11 Charging station: Tightening the screws You have secured the charging station with the base plate on the working surface. The charging station is ready for use. SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
● Plug the RJ-50 end of the cable into the bottom of the device handle. Press the connector firmly into the device until it audibly locks in place. The cable is then correctly connected. SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
Connector A Designation Wire Color Connector B 24 AWG 28 AWG White 28 AWG Green 24 AWG Black Housing Shield Blank Housing Description of the connector assignment of the reader (Page 24). SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
Page 23
Designation Wire Color Connector Wire Color Connector 24 AWG Brown Orange Yellow Green Black 24 AWG Black RING Housing Shield Shield Description of the connector assignment of the reader (Page 24). SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
Connecting (SIMATIC MV320) 4.3 Connector assignment reader Connector assignment reader The SIMATIC MV320 has an RJ-50 connector (10P-10C). The connector assignment is as follows: Connector Name/function +VIN (5v) USB_DM USB_DP RS-232 TX (output from the reader) RS-232 RTS (output from the reader)
In the delivery state, the batteries are approximately 50% charged. Charge the batteries before turning on the device for the first time. The charging time for a completely discharged battery with the charging station and the USB cable is about 4 hours. SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
Page 26
1. Connect the USB cable to the USB port of the computer. 2. Remove the cover labeled "Remove Before Use". ② 3. Place the device in the charging station ① Charge indicator ② Charging station SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
To turn on the device, press one of the buttons or the trigger and hold it down for 1 s. The reader beeps, vibrates and the LEDs flash when the device is turned on and ready for operation. SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
④ The reader beeps once and the wireless symbol is lit constantly. ① Communication mode switch ② Blue LED ③ QuickConnect code ④ Wireless symbol ⑤ Read confirmation ⑥ Memory symbol SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
Operation Working with the SIMATIC MV320 reader Without metal stand 1. Hold down the trigger button of the reader. 2. The two blue beams sent out by the reader are used for targeting. The blue beams must be directed to the center of the barcode. The ideal read distance between the device and barcode is approximately 10 cm.
Page 30
Operation 6.1 Working with the SIMATIC MV320 reader With metal stand/with stand detection The hardware product version 2 of the reader has stand detection. By default, the reader automatically changes to the motion detection mode when it is placed on the stand. In this mode, the reader is activated by holding a barcode in the scanner field.
If the barcode is in the viewing field of the device and at the optimum read distance (approximately 10 cm from the device), the barcode will be read automatically. The reader beeps and vibrates and the read confirmation LED flashes green. SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
● If a cable connection is required, move the switch for the communication mode to the ② position ● For USB download mode or USB keyboard mode, you need to scan in the activation code of the batch mode. SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
Once you have enabled the communication mode, you can start collecting data. To transfer the data to the host device, you must scan the configuration code "Batch Mode Transfer All Data in Memory". SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
Page 34
A list of all configuration codes, e.g. for batch mode or communication mode, is available in the manual "SIMATIC MV325 Configuration Guide (https://support.industry.siemens.com/cs/ww/en/ps/15161/man)". SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
– Suffix Carriage Return Line Feed (RS232 Mode Only) ● SIMATIC MV325: – Suffix Enter (USB Keyboard Mode Only) A list of the mentioned codes is available in the manuals "SIMATIC MV320 Configuration guide (https://support.industry.siemens.com/cs/ww/en/ps/15160/man)" and "SIMATIC MV325 Configuration guide (https://support.industry.siemens.com/cs/ww/en/ps/15161/man)".
SIMATIC MV320 Situation LED displays on the Acoustic signal Vibration signal reader SIMATIC MV320 is turned on. Green LED flashes Successful establishment of the con- Green LED goes off nection between SIMATIC MV320 and after connection the host (by cable).
– If the battery charge is less than 10%, the 1st LED flashes at short intervals. – If there is 25% or more charge remaining, the LEDs flash "ON" for 4 seconds. SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
You will find an explanation of how to switch the SIMATIC MV325 to batch mode in Communication in batch mode (SIMATIC MV325) (Page 33). ① Wireless symbol ② Read confirmation ③ Memory symbol SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
● You can also use a mild cleansing agent: Then wipe the window with a damp cloth. Approved cleaning agents The following products have been approved for cleaning the SIMATIC MV320: ● Wipes soaked in alcohol ● Clorox® disinfecting wipes ●...
Page 44
Service and maintenance SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
Aztec Code, Data Matrix, Han Xin, MaxiCode, Micro QR Code, QR Code Postal codes Australian, Intelligent Mail, Japan Post Group, KIX Code, Korea Post, Planet,Postnet, Royal Mail Group Ltd, UPU ID-tags SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
Page 46
135 x 130 x 51 Reader • 60 x 115 x 83 Charging station • Weight 0.171 kg Reader • 0.48 kg Battery • 0.153 kg Charging station with integrated Bluetooth • modem SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
Page 47
Read field 30° horizontal by 20° vertical Near field • 50° horizontal by 33.5° vertical Wide field • Read distance Approx. 100 mm Sensor CMOS 1.2 megapixels (1280 x 960) gray shades SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
Page 48
20.8 mil Data Matrix 1 mil = 0.0254 mm The ideal read distance is about 100 mm. Depending on the code type and code size, smaller or larger distances are possible. SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
Keyboard Mapping) than with selection of a specific keyboard language (e.g. US keyboard). SIMATIC MV320 Codes for configuration of the device A current list of the codes for configuration of the SIMATIC MV320 reader is available at the following link: SIMATIC MV320 Configuration guide (https://support.industry.siemens.com/cs/ww/en/ps/15160/man)
With the help of this function, you can specify the code character length to be read by the SIMATIC MV320 and SIMATIC MV325 handheld readers. When you enable this function, the handheld readers will only read codes that have exactly the character length you have specified.
Page 55
Follow these steps to disable the function: 1. Scan the device-specific reset code: – MV320: – MV325: When the reset code is scanned, the handheld reader is reset to the factory settings and restarted. SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
(https://support.industry.siemens.com/My/ww/en/requests) Contact partner If you have any further questions on the use of our products, please contact one of our representatives at your local Siemens office. The addresses are found on the following pages: ● On the Internet (http://w3.siemens.com/aspa_app) ● In Catalog CA 01 ●...
Page 58
D-90327 Nuremberg. Phone: +49 (0) 180 523 56 11 (€ 0.14 /min. from the German landline network, deviating mobile communications prices are possible) For information about courses, see the SITRAIN homepage (http://sitrain.automation.siemens.com/sitrainworld/). SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
FCC CFR 47 Part15-Digital Devices, Subpart B-Unintentional Radiators, Class B (Octo- ber 1st 2011). This device is equivalent to the CR1400-Handheld from CodeCorp. SIMATIC MV325 (reader and charging station) CE marking Description Conformity with the R&TTE directive. SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
Page 60
IC: 9966A-BTR11 (CR2612_01 from FS: A1) IC: 9966A-BTR12 (CR2612_02 from FS: B1) The device MV325 CHARGING STATION (6GF3325-0AC03) is equivalent to the CRA- A104_02 device from CodeCorp. IC: 9966A-BTC02 (CRA-A104_02 from FS: A1) SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
● Increase the separation between the equipment and receiver. ● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ● Consult the dealer or an experienced radio/TV technician for help. SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...
(2) l’utilisateur de l’appareil doit accepter tout sired operation of the device. brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. SIMATIC MV320 / SIMATIC MV325 Operating Instructions, 08/2015, C79000-G8976-C352-03...