Attaching the BH1/BH2 Battery Handle
The HE40T uses the battery compartment to "snap to" the handle.
The BH1/BH2 handle is shown in Figure 1–5. The handle with
battery is shown in Figure 1–6.
To attach the handle to the reader:
Insert the tab on the back of the handle into the reader, as
shown in Figure 1–7.
Snap the reader onto the handle, matching the battery
compartment to the battery connectors, visible inside the
handle, as shown in Figure 1–7.
BH1/BH2 Handle with Battery
HE40T Quickstart Guide
Rev 1.0.1, Dec. 2006