Normal Playback; Listening To A Source Component - Kenwood VRS-N8100 Instruction Manual

Normal playback

Some preparatory steps are needed before starting playback.
POWER ON/STANDBY
ON/STANDBY
RCV Mode
POWER RCVR
Input Mode
Turning on the receiver
1 Turn on the power to the related components.
2 Turn on the power to this receiver by pressing the
POWER ON/STANDBY
the POWER RCVR key).
÷ After turning off a power supply, the POWER ON/STANDBY
or the ON/STANDBY
Selecting the input mode
If you have selected a component connected to the COAX 1 (DVD),
COAX 2 (VIDEO 1), OPT 1 (VIDEO 2), OPT 2 (AUX) or DIGITAL IN
(OPTICAL) jacks, make sure that the input mode setting is correct for the
type of audio signal to be used.
30
EN
INPUT SELECTOR
Input selector keys
or the ON/STANDBY key (or
key is not effective for 3 seconds.

Listening to a source component

1
Press the INPUT SELECTOR key (or the Input selector keys/
DVD, VID1, VID2, AUX, F.AUX, Game, TUNER, Network Server
or Memory Card) to select the source.
1 "TUNER"
2 "DVD"
3 "VIDEO1"
4 "VIDEO2"
5 "GAME"
6 "F.AUX"
7 "AUX"
8 "NET SERVER"
9 "MEMORY CARD"
÷ When the "NET SERVER" or "MEMORY CARD" input is
selected, the OSD function on the TV screen is activated and
detection of the server starts.
2
Start playback from the selected source.
3
Use the VOLUME CONTROL knob (or the VOL +/- keys) to
adjust the volume.
INPUT SELECTOR
VOLUME CONTROL
Input selector keys
VOL ＋ / −