Kenwood VRS-N8100 Instruction Manual page 27

Preparing for playback
"Main" Setting
The settings available in this menu includes the setting of the language of
the OSD menu, setting of the video format used when this unit outputs the
video or photo data in PC that has been input through the network, setting
of the screen saver, setting of the black level, and updating of the firmware.
The default setups are as follows.
"Menu Language" Setting: "English"
"Video Out" Setting:
"NTSC CVBS&Y/C" (For U.S.A. and Canada)
"PAL CVBS&Y/C" (For Europe and Australia)
"Screen Saver" Setting: "ON"
"Black Level Setup" Setting:
"7.5 IRE" (For U.S.A. and Canada)
"0 IRE" (For Europe and Australia)
"Menu Language" Setting:
This setting item is used to set the language used to display the setup
menu and OSD on the TV screen.
NET LINK
Back Back
Main Menu Language
IP Video Out
Screen Saver
Black Level Setup
Fifmware Update
1 "English"
2 "German"
3 "French"
4 "Spanish"
5 "Italian"
6 "Dutch"
7 "Japanese"
"Video Out" Setting:
This setting item is used to select the format of the video signal
output at the VIDEO OUT jacks.
The video format should be selected according to the video format
of the connected TV.
Press the Video Out key to switch the video format
temporarily.
As this is merely a temporary setting, the video format
should be re-set in the network setting operation.
NET LINK
Back Back
Main Menu Language
IP Video Out
Screen Saver
Black Level Setup
Fifmware Update
Network Setup
Back
English
German
French
Spanish
Italian
Dutch
Japanese
Network Setup
Back
NTSC CVBS&YC English
NTSC CVBS&YCbCr NTSC/CVBS/Y/C
NTSC CVBS&RGB 4:3
PAL CVBS&YC 3 minites
PAL CVBS&YCbCr Disable
NTSC CVBS&RGB
480p YCbCr
720p YCbCr
1080i YCbCr
Video Composite
Format Output
1
NTSC CVBS
2
NTSC CVBS
3
PAL CVBS
4
PAL CVBS
5
480p (NTSC) - - - -
6
576p (PAL) - - - -
7
720p - - - -
8
1080i - - - -
÷ The initial setting is "NTSC CVBS&Y/C" (For U.S.A. and
Canada).
÷ The initial setting is "PAL CVBS&Y/C" (For Europe and
Australia).
Video Formats
There are roughly two kinds of video formats that are used to
display TV pictures and video data (NTSC and PAL). These
formats are used according to the countries and regions.
TV formats in major countries
"NTSC": Japan, Taiwan, Korea, USA, Canada, Mexico,
Philippines, Chile, etc.
"PAL": China, U.K., Germany, Australia, New Zealand,
Kuwait, Singapore, etc.
Interlaced scanning and progressive scanning
These are the two scanning methods for displaying the TV
picture. Interlaced scanning displays a TV picture by drawing
every other scanning line from the top of the screen, and
progressive scanning draws all scanning lines from the top of
the screen.
Progressive scanning offers a TV picture with fewer flickers
than interlaced scanning.
The figure used in the video format name indicates the
number of effective scanning lines.
Example:
"720p": Progressive scanning with 720 effective scan-
ning lines
"1080i": Interlaced scanning with 1080 effective scan-
ning lines
"Screen Saver" Setting:
This setting item is used to set the screen saver function.
NET LINK
Back Back
Main Menu Language
IP Video Out
Screen Saver
Black Level Setup
Fifmware Update
1 "ON": The screen saver starts when you leave this
unit in stop mode for about 5 minutes.
2 "OFF"
Compo-
S Video
nent
Output
output
Y/C - - - -
- - - - Y Cb Cr
Y/C - - - -
- - - - Y Cb Cr
- - - - Y Cb Cr
- - - - Y Cb Cr
- - - - Y Cb Cr
- - - - Y Cb Cr
Network Setup
Back
ON
OFF
27
EN