Items Shown On The Display Panel - Toshiba 8070 Service Manual

5.2 Items Shown on the Display Panel

5.2.1 Display during normal copying
No. Message
1 WAIT WARMING UP
2 READY
3 COPYING
4 WAIT 30 SEC FOR
WARMING UP
5 PLACE NEXT
ORIGINAL
6
C
6570/5570 DISPLAY UNIT
Conditions of machine
Being warmed up
• Indicated after the main switch is
switched ON up until the machine
becomes capable of copying.
Capable of copying.
• Indicated when the machine is
capable of copying and the
operator's instructions for copying
conditions are awaited.
• Returns to the initial condition if no
key input is given for 45 seconds.
Now copying.
• Indicated by pressing the START
key.
• Copy quantity indicator becomes
"1" and copying is completed.
Energy saving conditions.
ADU 1-sided copying standby state.
Timer OFF
• No message is displayed in the
display panel.
• Timer LED is turned ON.
Fig. 5.2-1
5 - 2
Notes
• The number and reproduction ratio of
copies are indicated, for example, as
"0", "100%" when the main switch
comes ON.
• Copy quantity indicator indicates as
"1". When a digital key is pressed, the
set number is indicated.
• The set number is cleared to "1" by
pressing the CLEAR/STOP key.
• Manual copying is possible.
• After completion of copying, the copy
quantity indicator returns to the
initially set number.
• Released by pressing the ENERGY
SAVER key or the START key.
• When using ADU 1-sided, and when
not using ADF.
• Press the START key to clear.
Mar. 1999 © TOSHIBA TEC