Installing the Switch 2224
Installation Procedures
4. Mount the Switch
After a transceiver has been installed and you have verified that the switch
passes its self test, you are ready to mount the switch in a stable location. The
Switch 2224 can be mounted in these ways:
Rack or Cabinet Mounting
The Switch 2224 is designed to be mounted in any EIA-standard 19-inch telco
rack or in an equipment cabinet such as a server cabinet.
W a r n i n g
For safe operation, please read the Installation Precautions on page
2-3 before mounting the switch.
1.
10 mm
M4 screws
2-8
in a rack or cabinet
on a horizontal surface
on a wall
Use a #1 Phillips (cross-head) screwdriver and attach the mounting
brackets to the switch with the included 10-mm M4 screws.