HP ProCurve 2224 Installation Manual page 57

N
network cables
100Base-FX connections ... 2-4
100Base-TX connections ... 2-4
10Base-T connections ... 2-4
fiber-optic, specifications ... B-5
incorrect connections ... 3-1
required types ... 2-4
twisted-pair connector pin-outs ... B-1
network devices
connecting to the switch ... 2-12
network ports
connecting to ... 2-12
location on switch ... 1-2
standards compliance ... A-2
types of ... 1-2
non-standard network cables, effects ... 3-2
P
parts, included with the switch ... 2-1
physical specifications, switch ... A-1
pin-outs
twisted-pair cables ... B-1
port LEDs
Link ... 1-3
Mode ... 1-3
ports
10/100Base-TX, location on switch ... 1-2
network connections ... 2-12
power connector ... 1-5
Power LED ... 1-3
behavior during self test ... 2-7
location on switch ... 1-2
power source
connecting the switch to ... 2-11
precautions
mounting the switch ... 2-3
power requirements ... 2-3
R
rack
mounting precautions ... 2-3
mounting the switch in ... 2-8
regulatory statements ... C-8
Reset button
description ... 1-2
location on switch ... 1-2
resetting the switch
location of Reset button ... 1-2
troubleshooting procedure ... 3-5
S
safety and regulatory statements ... C-1
safety specifications ... A-2
segment switch
sample topology ... 2-14
selecting the Mode LED display ... 1-4
self test
LED behavior during ... 2-7
slot for transceiver module
location on switch ... 1-2
specifications
connectors ... A-2
electrical ... A-1
environmental ... A-1
physical ... A-1
safety ... A-2
straight-through cable
pin-out ... B-4
summary of switch installation ... 2-2
switch
connecting to a power source ... 2-11
description ... 1-1
electrical specifications ... A-1
environmental specifications ... A-1
features ... 1-6
front panel description ... 1-2
included parts ... 2-1
LED descriptions ... 1-3
mounting in a rack or cabinet ... 2-8
mounting on a wall ... 2-10
mounting on horizontal surface ... 2-11
operation ... 1-6
physical specifications ... A-1
Index – 3