Changing The Bluetooth Power - Toyota Display Audio system Owner's Manual

The information displays the following
items.
Name
It is available to set wheth-
"Bluetooth* er registered devices will
Power" be connected automatical-
ly or not.
The
"Device
Bluetooth
Name"
cannot change it.
The password when you
register your Bluetooth de-
"Passcode"
vice in the system. You
can change it.
The address peculiar to
"Device
the system. You can not
Address"
change it.
The name of the profile
which your Bluetooth
"Profiles" vice corresponds to. (For
details of each profile, see
pages 49 and 70.)
The
"Display
connection status. You
Phone Status"
can turn it on and off.
"Display The portable audio player
Audio Player connection status. You
Status" can turn it on and off.
If you want to change the settings, refer
to the following pages.
When you change the settings, touch
"Save" after changing them.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
Function
name in the
®
network. You
®
de-
®
Bluetooth phone
CHANGING THE Bluetooth
POWER
1
Touch "Bluetooth* Power".
2
Touch "On" or "Off".
3
Touch "Save".
In case that the state of "Bluetooth*
Power" is changed from "Off" into "On",
®
Bluetooth connection will begin.
The "Bluetooth* Power" display shows
the following state.
When *
"Bluetooth
®
Bluetooth device is automatically con-
nected when you start your vehicle.
When *
"Bluetooth
®
Bluetooth device is disconnected, and
the system will not connect to it next time.
You can select the state of "Bluetooth*
Power".
On: The automatic connection is turned
on.
Off: The automatic connection is turned
off.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
1. SETUP OPERATION
®
is "On": The
Power"
is "Off": The
Power"
5
103