When A Bluetooth Device Is Registered - Toyota Display Audio system Owner's Manual

1
Touch "Connect" on the screen.
2
Touch "Yes" to connect your portable
player.
3
When this screen is displayed, perform
a device discovery from your portable
audio player.
4
Input the passcode displayed on the
screen into your portable audio player.
A passcode is not required for SSP
(Secure Simple Pairing) compatible Blue-
®
tooth phones. Depending on the type of
®
Bluetooth phone being connected, a
message confirming registration may be
displayed on the Bluetooth
screen. Respond and operate the Blue-
®
tooth phone according to the confirma-
tion message.
If you want to cancel it, touch "Cancel".
5
When the connection is completed,
this screen is displayed.
Once you have registered it, the system
automatically connects to your portable
audio player device every time you start
your vehicle.
The portable audio player information is
registered when the Bluetooth
system is connected. When you release
possession of your vehicle, remove your
portable audio player. (See "REMOV-
ING A Bluetooth
99.)
INFORMATION
● For details on device discovery for your
portable audio player, refer to the porta-
ble audio player's user's guide.
If
Bluetooth
the device connected and add a new
device.
1
Touch "Connect" on the screen.
®
phone's
1. AUDIO SYSTEM OPERATION
®
DEVICE" on page
WHEN A Bluetooth
REGISTERED
you have registered
®
devices, you can change
2
®
audio
®
DEVICE IS
some
51