Removing A Bluetooth Device - Toyota Display Audio system Owner's Manual

2
When this screen is displayed, perform
a device discovery from your Bluetooth
device.
3
Input the passcode displayed on the
screen into your Bluetooth device.
A passcode is not required for SSP
(Secure Simple Pairing) compatible Blue-
®
tooth phones. Depending on the type of
®
Bluetooth phone being connected, a
message confirming registration may be
displayed on the Bluetooth
screen. Respond and operate the Blue-
®
tooth phone according to the confirma-
tion message.
If you want to cancel it, touch "Cancel".
®
If the Bluetooth
®
has a Bluetooth
be registered at the same time.
4
When the connection is completed,
this screen is displayed.
Once you have registered it, the system
automatically connects to your Bluetooth
device every time you start your vehicle.
®
phone's
phone to be registered
audio function, this can
INFORMATION
● For details on device discovery for your
Bluetooth phone, refer to the Bluetooth
phone's user's guide.
When you
●
®
Bluetooth audio will disconnect.
● If the Bluetooth
phone and Bluetooth
will register phone and audio simulta-
neously. If an on-screen message
appears, follow the message and regis-
ter either or both Bluetooth
or Bluetooth
REMOVING A Bluetooth
DEVICE
1
Touch "Remove" to remove your
®
Bluetooth
2
Select the device to remove.
INFORMATION
®
When you delete a Bluetooth
●
the phonebook data will be deleted at
the same time.
1. SETUP OPERATION
register your
®
device has Bluetooth
®
audio functions, it
®
phone and/
®
audio functions.
®
device from the system.
®
phone,
®
5
phone,
99