■
After a fuse is replaced
If the lights do not turn on even after the fuse has been replaced, a bulb
●
may need replacement. ( P. 484)
If the replaced fuse blows again, have the vehicle inspected by your
●
Toyota dealer.
■
If there is an overload in the circuits
The fuses are designed to blow, protecting the wiring harness from damage.
CAUTION
■
To prevent system breakdowns and vehicle fire
Observe the following precautions.
Failing to do so may cause damage, and possibly a fire or injury.
●
Never use a fuse of a higher amperage rating than indicated, or use any
other object in place of a fuse.
●
Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix.
This can cause extensive damage or even fire.
●
Do not modify the fuse or the fuse box.
NOTICE
■
Before replacing fuses
Have the cause of electrical overload determined and repaired by your Toy-
ota dealer as soon as possible.
4-3. Do-it-yourself maintenance
4
483