Reservoir Tank - Subaru 2001 FORESTER Service Manual

Power Assisted System (Power Steering)

9. Reservoir Tank

A: REMOVAL
S601075A18
1. NON-TURBO MODEL
Refer to "Oil Pump" section for details of reservoir
tank removal order. <Ref. to PS-93, NON-TURBO
MODEL, REMOVAL, Oil Pump.>
2. TURBO MODEL
1) Remove air intake duct. <Ref. to IN(DOHC
TURBO)-8, REMOVAL, Air Intake Duct.>
2) Drain fluid from the reservoir tank.
3) Disconnect return hose and suction hose from
reservoir tank.
CAUTION:
¼ Do not allow fluid from the hose end to come
into contact with pulley belt.
¼ To prevent foreign matter from entering the
hose, cover the open ends of them with a clean
cloth.
(1) Suction hose
(2) Pipe D
(3) Return hose
4) Remove reservoir tank from bracket by pulling
it upwards.
B: INSTALLATION
1. NON-TURBO MODEL
Refer to "Oil Pump" section for details of reservoir
tank installation order. <Ref. to PS-95, NON-
TURBO MODEL, INSTALLATION, Oil Pump.>
RESERVOIR TANK
S601075
S601075A1804
S601075A1805
ST0022
S601075A11
S601075A1104
2. TURBO MODEL
1) Install reservoir tank to bracket.
2) Connect return hose and suction hose to reser-
voir tank.
(1) Suction hose
(2) Pipe D
(3) Return hose
3) Feed the specified power steering fluid. <Ref. to
PS-101, Power Steering Fluid.>
C: INSPECTION
Check reservoir tank for cracks, breakage, or dam-
age. If any cracks, breakage, or damage is found,
replace reservoir tank.
PS-100
S601075A1105
ST0022
S601075A10