Basic Inspection - Subaru 2001 FORESTER Service Manual

C: INSPECTION

1. BASIC INSPECTION

¼ In accordance with the following table, check all removed parts for wear and damage, and make repair
or replacement if necessary.
No. Parts
1 Oil pump (Exterior)
2 Pulley
3 Cap
4 Strainer
5 Oil pump (Interior)
6 O-ring
7 Oil tank
8 Bracket
S601070A10
S601070A1002
Inspection
(1) Crack, damage or oil leakage
(2) Play of pulley shaft
(1) Damage
(2) Bend
Crack or damage
(1) Clogging with dirt
(2) Breakage
(1) Defect or burning of vane pump
(2) Bend in the shaft or damage to
bearing
Crack or deterioration
Crack, damage or oil leakage
Crack
OIL PUMP
Power Assisted System (Power Steering)
Replace oil pump with a new one.
Measure radial play and axial play.
If any of these exceeds the service limit, replace oil
pump with a new one.
Replace it with a new one.
Measure V ditch deflection.
If it exceeds the service limit, replace pulley with a
new one.
Replace it with a new one.
Wash it.
Replace it with a new one.
Check resistance to rotation of pulley.
If it is past the service limit, replace oil pump with a
new one.
Oil pump emits a noise that is markedly different in
tone and loudness from a sound of a new oil pump
when turning with a string put around its pulley,
replace oil pump with a new one.
Replace it with a new one.
Replace it with a new one.
Replace it with a new one.
PS-97
Corrective action