Kit Inspection; Kit Contents - GREAT PLANES Super Skybolt Instruction Manual

Before starting to build, take an inventory of this kit to make sure it is complete, and inspect the parts to make sure they
are of acceptable quality. If any parts are missing or are not of acceptable quality, or if you need assistance with assembly,
contact Product Support. When reporting defective or missing parts, use the part names exactly as they are written in
the Kit Contents list.
1
4
5
6
7
(1) 5/16"-24 Spinner Adapter
(4) Wing Strut Pegs
(1) 2-1/2" [64 mm] Aluminum Spinner
(1) Outer Pushrod Tube
(1) Anti-Rotation Pin
(1) Radio Tray
(1) Hook and Loop Material
(1) .60 – 1.20 Engine Mount
(2) 5/32" [4 mm] Axle Shafts
(1) Screw-Lock Pushrod Connector
(1) Nylon Retainer (for Screw-Lock
Pushrod Connector)
(2) 5/16"-24 Nylon Lock Nuts
(6) 4-40 Nylon Lock Nuts
(5) Large Nylon Control Horns
(4) Small Nylon control Horns

KIT INSPECTION

Great Planes Product Support
3002 N. Apollo Drive, Suite 1
Champaign, IL 61822
Telephone: (217) 398-8970, ext. 5
Fax: (217) 398-7721
E-mail: airsupport@greatplanes.com

KIT CONTENTS

3
2
8
13
15
17
19
Kit Contents (not photographed)
(2) 1/4-20 Nylon Wing Bolts
(8) 2-56 Nylon Clevises
(12) CA Hinges
(2) #4 Flat Washers
(8) #2 Flat Washers
(8) #8 Flat Washers
(8) #8 Lock Washers
(4) 6-32 x 1-1/2" [38 mm] Threaded Studs
(4) 6-32 Knurled Nuts
(1) 4-40 x 1/8" [3 mm] SHCS
(6) Nylon FasLinks
(8) Silicone Clevis Retainers
(6) #4 x 1/2" [13 mm] SMS
(6) 6-32 x 1/4" [6 mm] SHCS
(14) #2 x 3/8" [9.5 mm] SMS
(12) 4-40 x 3/8" [9.5 mm] Phillips Screws
9
10
11
12
14
22
16
20
18
23
21
6
Kit Contents
1. Cowl
2. Fuselage
3. Canopy
4. Bottom Left Wing Panel w/Aileron
5. Bottom Right Wing Panel w/Aileron
6. Top Left Wing Panel w/Aileron
7. Top Right Wing Panel w/Aileron
8. Horizontal Stabilizer & Elevators
9. Tailwheel Assembly
10. Vertical Fin & Rudder
11. Landing Gear
12. Main Wheels (2)
13. Aluminum Joiner Plate
14. Wheel Pants (L&R)
15. Wing Struts (2)
16. Wing Bolt Plate
17. Cabane Struts (4)
18. Cabane Strut Braces (2)
19. Top Wing Joiner
20. Carry Handle Pieces (4)
21. Bottom Wing Joiner (2)
22. Fuel Tank
23. Servo Mounting Blocks (4)
(2) 4-40 x 1/2" [13 mm] SHCS
(14) 2-56 x 1/2" [13 mm] Phillips Screws
(8) 8-32 x 1" [25 mm] SHCS
(8) #2 x 1/2" [13 mm] SMS
(4) 2-56 x 12" [305 mm] Threaded One-
End Pushrods
(4) 2-56 x 36" [914 mm] Threaded One-
End Pushrods
(6) 5/32" [4 mm] Wheel Collars