GREAT PLANES Super Skybolt Instruction Manual page 31

ElectriFly ™ by Great Planes Triton
Imagine a charger so versatile it can be used with lithium-ion
and lead-acid batteries as effectively as NiCd and NiMH cells. A
unit that can peak charge tiny park flyer packs and 24V car
batteries alike. A charger that can discharge as well as charge,
cycle packs from 1 to 10 times automatically, memorize peak
and average battery voltages for each cycle – and constantly
display battery capacity, voltage, current and time as each cycle
progresses. Then, imagine that the charger, which can do all
this, is about the size of a thick paperback book, and weighs just
over a pound. The advanced computer technology in the Triton
Peak Charger makes it possible to accomplish all this and more,
through controls and menus so simple that programming is a
breeze. For more information, log on at www.electrifly.com –
and be amazed. 1-year warranty. GPMM3150
Great Planes C.G. Precision Aircraft Balancer
Accurate balancing makes trainers more stable, low-wings
more agile, and pylon planes move at maximum speed. The
™ Peak Charger
™
innovative C.G. Machine helps you achieve optimum balance
easily, without measuring or marking–and without the errors
that fingertip balancing can cause. You'll quickly pinpoint your
plane's exact center of gravity. Then you'll know at a glance
whether weight should be added, removed or relocated. The
C.G. Machine works with kits and ARF models of any size and
wingspan. Its slanted wire balancing posts support models
weighing up to 40 pounds. GPMR2400
Great Planes Pro Adhesives
™
"Best if used by" dates on the label provide visible proof of
freshness on all Pro CAs. Available in formulas that range
from thin, quick-bonding CA to Gel – a formula so thick that
it won't run even on nearly vertical surfaces. Pro Epoxies are
available in money-saving 4-ounce sizes. Also available: CA
debonder; CA activator; Glue-B-Gone
Pro Wood Glues; Pro Threadlocker; and Milled Fiberglass
Reinforcer. GPMR6001 thru 6049
31
™ adhesive remover;