OBJ_BUCH-1275-003.book Page 24 Tuesday, October 4, 2011 9:21 AM
24 | English
Cordless chain saw
Charging period (battery discharged)
Number of battery cells
Allowable charging temperature range
Weight according to EPTA-Procedure 01/2003
Please observe the article number on the type plate of your machine. The trade names of the individual ma-
chines may vary.
Measured sound values determined accord-
ing to EN 60745.
Typically the A-weighted noise levels of the
product are: Sound pressure level 74 dB(A);
sound power level 94 dB(A). Uncertainty
Wear hearing protection!
Vibration total values a
(triax vector sum)
and uncertainty K determined according to
, K=1.5 m/s
The vibration emission level given in this infor-
mation sheet has been measured in accord-
ance with a standardised test given in EN
60745 and may be used to compare one tool
with another. It may be used for a preliminary
assessment of exposure.
The declared vibration emission level repre-
sents the main applications of the tool. How-
ever if the tool is used for different applica-
tions, with different accessories or poorly
maintained, the vibration emission may differ.
This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vi-
bration should also take into account the
times when the tool is switched off or when it
is running but not actually doing the job. This
may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect
the operator from the effects of vibration
such as: maintain the tool and the accesso-
ries, keep hands warm, organise work pat-
Declaration of Conformity
We declare under our sole responsibility that
the product described under "Technical data"
is in conformity with the following standards
or standardization documents: EN 60745
(battery powered product) and EN 60335
(battery charger) according to the provisions
of the directives 2011/65/EU, 2006/95/EC,
2004/108/EC, 2006/42/EC, 2000/14/EC.
EC Type Certification No. 2131439.01CE by
notified testing agency No. 0344, KEMA Qual-
ity B.V. Arnhem, Netherlands.
F 016 L70 758 | (4.10.11)
AL 3640 CV
2 607 225 099
2 607 225 101
2 607 225 103
2000/14/EC: Guaranteed sound power level
97 dB(A). Conformity assessment procedure
according to Annex V.
Equipment category: 6
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS,
Stowmarket, Suffolk IP14 1EY, England
Dr. Egbert Schneider
Dr. Eckerhard Strötgen
Senior Vice President
Robert Bosch GmbH, Power Tools Division
For Your Safety
Warning: Switch off and remove battery
from power tool before adjusting or
Do not use 4.5 Ah battery with this power
Removing the Battery (see figure A)
The battery 17 is equipped with two locking
levels that should prevent the battery from
falling out when pushing the battery unlock-
ing button 18 unintentionally. As long as the
battery is inserted in the power tool, it is held
in position by means of a spring.
Note: The power tool will not operate unless
both locking levels are engaged.
To remove the battery 17:
Push the battery against the base of the
power tool (1.) and at the same time
press the battery unlocking button 18
Pull the battery out of the power tool
until a red stripe becomes visible (3.).
Press the battery unlocking button 18
again and pull out the battery completely.
AKE 30 LI
2 607 336 107
AL 3620 CV
2 607 225 657
2 607 225 659
2 607 225 661
Bosch Power Tools