Storing Components - Dell Z9000 Installing

The system is powered-up as soon as the power cord is connected between the system and the power
source.
CAUTION: Always disconnect the power cable, before the power supply slots are serviced
CAUTION: The power supply cord is used as the main disconnect device on the AC and DC system; ensure
that the socket-outlet is located/installed near the equipment and is easily accessible.

Storing components

If you do not install your system and components immediately, Dell Force10 Networks recommends that
you properly store the Z9000 and all optional components until you are ready to install them.
WARNING: Electrostatic discharge (ESD) damage can occur when components are mishandled. Always
wear an ESD-preventive wrist or heel ground strap when handling the Z9000 and its accessories. After you
remove the original packaging, place the Z9000 and its components on an antistatic surface.
Follow these storage guidelines:
• Storage temperature should remain constant ranging from -4° to 158° F (-20°C to 70° C).
• Store on a dry surface or floor, away from direct sunlight, heat, and air conditioning ducts.
• Store in a dust-free environment.
Site Preparations | 15