Replace A Fan Module - Dell Z9000 Installing

Figure 6-1. Removing the fan module screen
PSU0
PSU1
Latching
screw
Figure 6-2. Replacing the fan module
PSU0
Fan Module 0
PSU1
To install a new fan module, follow the steps below:
Step Task
Twist the latching screws so that the fan screen detaches from the chassis.
1
Remove the screen, and set aside.
2
Take the fan module out of the shipping box.
3
Using the grab handle, slide the module in to the bay.
4
Tighten the securing screw on the side of the module.
5
Replace the fan screen.
6
Twist the latches to the screen is securely attached.
7

Replace a fan module

To replace a fan module, follow the steps below.
Step Task
Twist the latching screws so that the fan screen detaches from the chassis.
1
Remove the screen, and set aside.
2
30 | Fans
Fan modules
Fan screen
Fan Module 1
Fan Module 2
Screw
Latching
screw
Fan Module 3
Grab Handle